Cannot customize the central driver's gage cluster...

[mm9351]

Hey everyone, was wondering if someone can provide assistance. I have been trying for some time to customize the central driver's gage cluster. I understand that we have 3 different screen options, toggling the left / right arrows, but I cannot get the center section display a speedometer gage, with the 0/P appearing inside a circular gage. I only see the 0/P in the center but inside an empty field, no gage. I can only set the LHS to a tach and the RHS as the speedometer. All of the Lexus media / photos and even YouTube how-to videos show the center gage as a speedometer / tach as a display option. I have no problem setting the small rectangular frame in each of the three sections with different data (holding the OK button and scrolling up / down) without an issue. But toggling through 1, 2, and 3 of the main displays and trying all available options I cannot show the central speedo. Even tried to setup different gages in Sport / Normal / ECO but it simply does not work. Then I was thinking my software may be down rev'd, but confirmed it is up to date (per the main display). Thanks in advance for your help!

 

[munkeeboi]

to get what you want, you have to change it in the settings on the center screen

 

[mm9351]

Thanks, it worked when I set to "meter type 1' on the center display which I thought I had adjusted previously. The owner's manual wasn't clear on this, or perhaps I was looking at the wrong section. Appreciate your advice.