💵 For Sale FS: OT Crossbars

[Motown]

Hi all,

$200 + shipping fees. Will ship anywhere in the US. Due to upcoming travel plans, I am only available to ship the items until September 13th.

I have a set of crossbars I removed from my OT last month. I'm removing because I'm not really a fan of the look, also I plan on getting an aftermarket roof rack in the near future. Uninstallation was pretty simple to figure out, installation should be just as easy. It can be done easy solo, but probably faster and easier with 2 people.

Items to note about the crossbars:
-[PLEASE READ]: While storing the crossbars, one of the bars slipped backwards and bumped the wall in my garage causing some minor damage. This is highlighted in the pictures attached to this post.
-All bolts/screws are included and separated in plastic bags for easy identification.

If you need additional/specific pictures or information, please let me know and I'll be happy to get them for you!

 

[rocabar79]

Are this for the gx550 premium rails? If they are im interested txt me at 9one5 3two9 8587

 

[Motown]

These came off of an OT GX. While I'm not 100% positive they will fit on a premium or other trims; my best hunch says they will.

 

[targaman]

I know it’s after Sept. 13th, but I’m in no rush. Do you still have the crossbars available?

 

[targaman]

Are the crossbars still available?

 

[Motown]

Are the crossbars still available?

Yes they are!

 

[targaman]

Hi Motown, thanks for your reply. Do you have the installation tool (maybe just a torx driver?) I’ve seen mentioned.
I’d pay your asking price if you could include shipping to 53072.

 

[Motown]

Hi Motown, thanks for your reply. Do you have the installation tool (maybe just a torx driver?) I’ve seen mentioned.
I’d pay your asking price if you could include shipping to 53072.

I'm not exactly sure about an installation tool. I removed the bars without a guide and was it was pretty simple. I was able to remove them with a phillips-head screwdriver and a hex key for the larger screws that go into the bars (I used to flat head screwdriver to firmly but gently remove the plastic covers on each side of each bar).

With shipping, it will be $300. If you're still interested, DM me and we can exchange details. If you have any further questions, DM me as well! Happy to help!

 

[targaman]

I'm not exactly sure about an installation tool. I removed the bars without a guide and was it was pretty simple. I was able to remove them with a phillips-head screwdriver and a hex key for the larger screws that go into the bars (I used to flat head screwdriver to firmly but gently remove the plastic covers on each side of each bar).

With shipping, it will be $300. If you're still interested, DM me and we can exchange details. If you have any further questions, DM me as well! Happy to help!

Thanks again but that’s more than I’m willing to a pay.
I recently shipped an Tonneau Cover to California for about $26 in what is likely a similar shaped box. The bars box might be slightly larger and slightly heavier but not $100.

 

[Motown]

Thanks again but that’s more than I’m willing to a pay.
I recently shipped an Tonneau Cover to California for about $26 in what is likely a similar shaped box. The bars box might be slightly larger and slightly heavier but not $100.

If you’re still open to buying these, I can take another try at quoting the shipping tomorrow.

Based off what you’re telling me, it seems like I may have made an error when trying to quote the shipping on the FedEx website.

 

[targaman]

Sure., USPS was the least expensive. I made the box out of part of a flat panel TV box.

 

[Motown]

Sure., USPS was the least expensive. I made the box out of part of a flat panel TV box.

I checked through USPS and shipping will be $37!

 

[IntrinoX]

PM'd you.