Mud Guard

Did u ask the dealer if it comes with hardware?
No hardware (or installation instructions), mudguards arrived today, but front ones appear to use existing hardware, holes line up. Super easy to install. Rear are a different story, will need to make some holes and need either plugs/screws.

Here’s some pictures of the front ones, rear will be a separate post
 

Attachments

  • IMG_4258.jpeg
    IMG_4258.jpeg
    159.5 KB · Views: 392
  • IMG_4554.jpeg
    IMG_4554.jpeg
    199.6 KB · Views: 334
  • IMG_4550.jpeg
    IMG_4550.jpeg
    255.5 KB · Views: 269
  • IMG_4552.jpeg
    IMG_4552.jpeg
    156.7 KB · Views: 274
  • IMG_4559.jpeg
    IMG_4559.jpeg
    197.2 KB · Views: 281
  • IMG_4560.jpeg
    IMG_4560.jpeg
    188.6 KB · Views: 301
Last edited:
Did u ask the dealer if it comes with hardware
For the rear mudguards, they attach to the inner wheel well lower than any current screws/clips. There are small indentations on where the guard holes line up (see pictures). They have a rearward extension that does line up with two bolts under the rear bumper (also see pictures). So I just need to find out if they’re screw holes or if they’re the clips/fasteners. I plan on reaching out to the dealer to see if there’s an installation document on them. If anyone knows - let me know. Hopefully this is helpful. On the picture for stock numbers - these are the Overtrail+ spec (since I have an OT+ that’s what I ordered).
 

Attachments

  • IMG_4258.jpeg
    IMG_4258.jpeg
    159.5 KB · Views: 298
  • IMG_4557.jpeg
    IMG_4557.jpeg
    305.4 KB · Views: 284
  • IMG_4556.jpeg
    IMG_4556.jpeg
    325.6 KB · Views: 241
  • IMG_4555.jpeg
    IMG_4555.jpeg
    319.3 KB · Views: 240
  • IMG_4545.jpeg
    IMG_4545.jpeg
    154.9 KB · Views: 235
  • IMG_4549.jpeg
    IMG_4549.jpeg
    134.5 KB · Views: 233
  • IMG_4548.jpeg
    IMG_4548.jpeg
    87.7 KB · Views: 225
  • IMG_4547.jpeg
    IMG_4547.jpeg
    115.2 KB · Views: 232
  • IMG_4546.jpeg
    IMG_4546.jpeg
    96.1 KB · Views: 289
For the rear mudguards, they attach to the inner wheel well lower than any current screws/clips. There are small indentations on where the guard holes line up (see pictures). They have a rearward extension that does line up with two bolts under the rear bumper (also see pictures). So I just need to find out if they’re screw holes or if they’re the clips/fasteners. I plan on reaching out to the dealer to see if there’s an installation document on them. If anyone knows - let me know. Hopefully this is helpful. On the picture for stock numbers - these are the Overtrail+ spec (since I have an OT+ that’s what I ordered).
Do you have an update on installation. I’m hoping they will fit the Luxury +. I am shocked Lexus didn’t make one. Running boards covered in dirt and above. My LX F-Sport came w nice ones. Any help appreciated.
 
@SEVC OT+
Just to be clear you, ordered:
FR - 7662160280
FL - 7662160230
RR - 7662560450
RL - 7662660450
Yep, that is correct - I have an OT+ so I ordered the over trail rear mudguards, even though they were a little more, but they fit well. Here’s a diagram a Lexus parts guy sent me with the hardware parts. I’m about to make an installation post, I didn’t use the plugs on the rear, I used the screws instead.
 

Attachments

  • IMG_0042.jpeg
    IMG_0042.jpeg
    105.6 KB · Views: 248
Yep, that is correct - I have an OT+ so I ordered the over trail rear mudguards, even though they were a little more, but they fit well. Here’s a diagram a Lexus parts guy sent me with the hardware parts. I’m about to make an installation post, I didn’t use the plugs on the rear, I used the screws instead.
Thanks, I have an OT+ also, so I'll get the same. I guess double up on all hardware listed in the pics? Thanks for jumping in first on this.
 
For the rear mudguards, they attach to the inner wheel well lower than any current screws/clips. There are small indentations on where the guard holes line up (see pictures). They have a rearward extension that does line up with two bolts under the rear bumper (also see pictures). So I just need to find out if they’re screw holes or if they’re the clips/fasteners. I plan on reaching out to the dealer to see if there’s an installation document on them. If anyone knows - let me know. Hopefully this is helpful. On the picture for stock numbers - these are the Overtrail+ spec (since I have an OT+ that’s what I ordered).
Ok, here’s a post after rear mudguards installation - hardware arrived today, super easy to install for the most part. I was being careful and maybe took 15mins.

I’ll try and attach pictures to help, I was sent a diagram that included part numbers for the hardware. Instead of the clip, I used an additional screw with washer (see diagram).

First, I placed the spring nuts on the indentions where screws will go inside the wheel well. Then, I took out the existing screws on the bottom of rear bumper behind the wheel well and placed the mudguard and then reinstalled the same screws - it holds the mudguard in place. Then I went into the wheel well and placed the top screw. Make sure to pull it flush with the line of the bumper and then tighten. I then placed screws in the other two holes. The hole furthest away in the wheel well is supposed to have a plastic clip, but I just ordered an extra screw and used one instead, it seems to have good seating in the plastic and is tight.

See some pictures below and happy to answer any questions, but it was pretty easy. As mentioned on previous post, the front mudguards use all the existing screws/clips, so no new hardware needed there.
 

Attachments

  • IMG_4622.jpeg
    IMG_4622.jpeg
    74 KB · Views: 249
  • IMG_4625.jpeg
    IMG_4625.jpeg
    119.1 KB · Views: 214
  • IMG_4626.jpeg
    IMG_4626.jpeg
    109.7 KB · Views: 207
  • IMG_4627.jpeg
    IMG_4627.jpeg
    133.4 KB · Views: 204
  • IMG_4628.jpeg
    IMG_4628.jpeg
    152.7 KB · Views: 211
  • IMG_4623.jpeg
    IMG_4623.jpeg
    257.9 KB · Views: 200
  • IMG_4624.jpeg
    IMG_4624.jpeg
    415.8 KB · Views: 206
  • IMG_0042.jpeg
    IMG_0042.jpeg
    105.6 KB · Views: 286
Last edited:
Thanks, I have an OT+ also, so I'll get the same. I guess double up on all hardware listed in the pics? Thanks for jumping in first on this.
I used 6 screws with 4 spring nuts - ordered them from lexuspartsnow.com as they were way cheaper than getting them through a dealer. They seem to be OEM
 
Yep, that is correct - I have an OT+ so I ordered the over trail rear mudguards, even though they were a little more, but they fit well. Here’s a diagram a Lexus parts guy sent me with the hardware parts. I’m about to make an installation post, I didn’t use the plugs on the rear, I used the screws instead.
SEVC OT+

Great information: Would it be safe to assume a NON Overtrail, or Luxury+, would use the same FR and FL but the RR and RL would change to below??

FR - 7662160280
FL - 7662160230
RR - 7662560450 would be Lux+: 7662560440
RL - 7662660450 would be Lux+: 7662660440

Can the local dealer order them even though they are Canadian Parts? I appreciate any help you can offer. Thanks for the photos as well.
 
SEVC OT+

Great information: Would it be safe to assume a NON Overtrail, or Luxury+, would use the same FR and FL but the RR and RL would change to below??

FR - 7662160280
FL - 7662160230
RR - 7662560450 would be Lux+: 7662560440
RL - 7662660450 would be Lux+: 7662660440

Can the local dealer order them even though they are Canadian Parts? I appreciate any help you can offer. Thanks for the photos as well.
I would assume so based on the part description, but not 100% sure - I ordered all these blindly as I could not find any diagrams anywhere.

I chatted with my local dealer parts guy, he said he could special order them but by doing so, they wouldn’t be returnable if they didn’t fit. So since that was the case, I just ordered them through the cheapest dealer’s online site I could find - Lexus of Wesley Chapel in FL. Their parts guy helped me out by sending the diagram of the hardware, which I ordered from lexuspartsnow.com as they seemed to be the cheapest for those. Per the parts guy, mudguards are not characterized as accessories in the Lexus parts system, so they don’t come with hardware or installation instructions.
 
Hopefully this helps with sourcing. All credit to @SEVC OT+

I ordered from OEM Lexus Parts At Discounted Prices | Lexus OE Parts and all parts were about $250 delivered. I ordered 2 extra spring nuts for my collection. Mine is an OT+ also to ordered the correct rears as suggested here.

Part Number​
Part Name​
Price​
Quantity​
Total​
76625-60450​
Mudguard Quarter Pa​
$76.66​
1​
$76.66​
76622-60230​
Mudguard Front Fender​
$32.89​
1​
$32.89​
76626-60450​
Mudguard Quarter Pa​
$76.66​
1​
$76.66​
76621-60280​
Mudguard Front Fender​
$32.89​
1​
$32.89​
90159-60625​
Wheel Opening Molding Screw​
$0.87​
6​
$5.22​
90183-05054​
Nut Spring​
$0.78​
4​
$3.12​
Subtotal: $227.44​
Standard Shipping: $24.19​
Discount: -$3.63​
Total: $248.00​
 
for those who like to gamble and want to try a budget option but it doesn't even look like the holes match up to the previous photos posted here so buyer beware

Best pricing i found so far for the OEM mudguards was from Bell Lexus Scottsdale - Genuine Lexus Parts | Bell Lexus North Scottsdale

About 26% off and Shipping up to $100 is free

https://www.aliexpress.us/item/3256807610888407.html?spm=a2g0o.productlist.main.9.4b04Bg6eBg6e0H&algo_pvid=00d00b67-668f-425f-8a2c-e097db4ce575&algo_exp_id=00d00b67-668f-425f-8a2c-e097db4ce575-4&pdp_npi=4@dis!USD!60.56!51.48!!!60.56!51.48!@2101e9ec17290147083291954e3548!12000042235120740!sea!US!903726755!ABX&curPageLogUid=99sBA8g9jzki&utparam-url=scene:search|query_from:
 
Last edited:
SEVC OT+

Great information: Would it be safe to assume a NON Overtrail, or Luxury+, would use the same FR and FL but the RR and RL would change to below??

FR - 7662160280
FL - 7662160230
RR - 7662560450 would be Lux+: 7662560440
RL - 7662660450 would be Lux+: 7662660440

Can the local dealer order them even though they are Canadian Parts? I appreciate any help you can offer. Thanks for the photos as well.
I Ordered these for my GX550 Luxury Plus and they are correct for that Model. Lexus Dealer Part Numbers below

1730839491946.png


It took a little time at first as the tires in the back were tough to work around with 2 of the screws. They look amazing and fit perfect. Lux + has the Running boards that drop down when the door is open and I checked before install and no issues.

For the fronts, there are two screws you unscrew and there is a 3rd space where there is a plastic Plug. I pulled it out and realized after a bit of time, you take a screw driver to pop the center out so you can use it again. If you do not, it won't go back into the hole and "pop" fastened.

The backs were also pretty easy except I struggled with the middle and inner most to work around the wheel. I used a screw in all three front places, but used two clips on the outer holes that are pre marked. I just pushed a nail through the plastic not too big but for the screw to catch and go in. The 2 underneath screws lined up perfectly. So 5 Screws in the back. 2 in the front and "pop plug" taken out and put back in.

I took the risk that these were correct for a NON Overtrail Model, and they were and OEM. Very Nice. I want to thank SVEC OT + for all your input and direction. I'm a bit of a novice and without your data, I wouldn't be able to figure it out. So thank you and my car thanks you.
 
Very informative post. My parts just arrived for my OT+ and I was just wondering does the rear install require any drilling or making new holes for screws?

Thanks
 
I Ordered these for my GX550 Luxury Plus and they are correct for that Model. Lexus Dealer Part Numbers below

View attachment 4913

It took a little time at first as the tires in the back were tough to work around with 2 of the screws. They look amazing and fit perfect. Lux + has the Running boards that drop down when the door is open and I checked before install and no issues.

For the fronts, there are two screws you unscrew and there is a 3rd space where there is a plastic Plug. I pulled it out and realized after a bit of time, you take a screw driver to pop the center out so you can use it again. If you do not, it won't go back into the hole and "pop" fastened.

The backs were also pretty easy except I struggled with the middle and inner most to work around the wheel. I used a screw in all three front places, but used two clips on the outer holes that are pre marked. I just pushed a nail through the plastic not too big but for the screw to catch and go in. The 2 underneath screws lined up perfectly. So 5 Screws in the back. 2 in the front and "pop plug" taken out and put back in.

I took the risk that these were correct for a NON Overtrail Model, and they were and OEM. Very Nice. I want to thank SVEC OT + for all your input and direction. I'm a bit of a novice and without your data, I wouldn't be able to figure it out. So thank you and my car thanks you.
Do you have pics installed? Looking to get these, depending on how they look. Thanks!!
 

GX550 Poll

  • Daylight white

  • flare red

  • meteor

  • sunset

  • dawn

  • lightning

  • afterglow

  • rainforest

  • iceberg

  • custom


Results are only viewable after voting.
Back
Top