I picked up my Overtrail + and all four tire pressures are set to 40 psi. Could some of you share where your psi is set? The vehicle sticker recommends 35 psi so I may just drop mine.
Tire psi?
- Thread starter houstongx
- Start date
I dropped mine from 40 to 35 and it drives so much better.
Most manufactures over-inflate vehicles during the manufacturing process and is common that they need to be adjusted to the sticker pressure. This is to help prevent flat spotting during storage and transport.
My dealer delivered my Premium+ with pressures in the mid 30s, but mileage in these things is terrible (not that I care about the cost, but the frequency of fill ups is annoying). Think the max psi on the 20” Yokohamas is closer to 50psi, so I’ve been planning to up the pressure significantly for road use.
Also waiting for KO3s or something more aggressive to be released in the right size…
Also waiting for KO3s or something more aggressive to be released in the right size…
I’m getting 18.5 mpg on the 20’s on a premium plus at 35 psi. Any higher, I feel like the ride will suffer
I have the OT with the Toyo AT3s and I have them at 33psi and they seem just fine and my mileage seems decent too with an overall calculated average just barely shy of 18mpg over 8K miles.
Mine were at 41 when I picked it up, with the spare at 50. Dropped the four to 35, and the spare to 40.
My spare still at 52 lol. Figure its best to keep that tire overinflated just in case
Mine are set at 38. Milage is ok and I like the ride. They were set at 40 when I picked it up from the dealer. I got new tires with my Westcott build and they set the tires at 38 so I just kept them there. I don't really drive it that much. It sits in the garage during the week and I try to take it out on the weekends.
That's why I left mine at 40. I figure, however, that the vehicle monitor shows all 5, so that's even better.
Similar threads
